Let SERVPRO walk you through commercial water loss steps
Whenever water spills into your Hall County office or manufacturing facility, it is wise to seek out help from a professional restoration company such as SERVPRO. Our water restoration technicians or WRTs have the best tools at our disposal to conduct prompt commercial water cleanup. However, in many instances, there is much that you and your maintenance and custodial staff can do to keep the problems from getting worse.
This first step when conducting any commercial water is to find the source of the leak. Once you and your team locate where the moisture is coming from, it is wise to turn off the water in that location. If there is anything that uses electricity in the area that got wet, make sure to turn the power to that region off so that no electrical shorts occur.
The next step is to determine what kind of water you are dealing with. If our WRTs at SERVPRO are on site we will then figure out what type of water has leaked out into your office or manufacturing plant. If the water source is a clean water pipe than mitigating the issues will be much easier because the chances of contamination are low. However, if the source of the leak is rainwater, a sink, or sewage line, the chances of contamination get higher, making it a good idea to call in the professionals.
Once you have determined if the water is clean or not, it is then wise to remove as much of it as possible while it is still liquid before it evaporates into the air or soaks into your contents or building materials. Liquid H20 can be removed much quicker and easier than water vapor or taking moisture out of wet materials.
To start, first, find any areas of your office or manufacturing building that have standing water. If the water is more than a couple of inches deep, it is best to use a submersible pump to suck up the water and put it into a sewage drain. If there is water sitting on a flat surface such as a tile or concrete floor, then mopping or squeegeeing can be the most effective cleaning method. If carpets inside your manufacturing facility got wet, then it is smart to vacuum up the water using a wet/dry vacuum.
If you ever notice a water leak inside your office or manufacturing plant in Hall County, it is wise to call in SERVPRO of Gainesville at (770) 536-1010 because We're Faster To Any Size Disaster.